Gammadot Rheology Testing & Consultancy Services
Unit 5C, Leaton Industrial Estate, Bomere Heath. Shrewsbury. Shropshire. SY4 3AP. UK
Tel: +44 (0)1939 291677 ...Email:

  Gammadot Rheology Quarterly Newsletter - March 2017

Welcome to the new look Gammadot quarterly newsletter.

Gammadot Rheology is the only demonstration site in the UK for Reologica rheometers as supplied exclusively in Britain by Infra Scientific Ltd.
Melt Flow Rate
Rotational Rheometry


Melt Flow Rate (Index) / Melt Volume Rate - MFR (MFI) / MVR to ISO standard 1133 or ASTM D1238. Full suite of weights and both standard and half sized capillary dies.
Rotational Rheometry - Shear viscosity versus shear rate / Time / Temperature • Oscillatory Rheometry as a function of Frequency / Time / Temperature • Cure Kinetics / Melt Stability / Thermal Degradation Studies to ASTM standard D4440.

ODR Rubber Rheometry
Capillary Rheometry


Rubber Cure Rheometry - With uprated temperature control and datalogging system. Cure Kinetics to ISO standard 3417 or ASTM 2084.
Capillary Rheometry - Shear viscosity as a function of shear rate • Extensional viscosity as a function of extension rate • Melt Density to ISO standard 11443 or ASTM D3835.

P.v.T. Behaviour
Brookfield Viscometry


High Pressure Dilatometry (PvT Behaviour) - Specific Volume or Density as a function of temperature & pressure.
Brookfield Viscometry - LV & RV viscometer ranges available • Full range of RV / LV spindles plus Small Sample Adaptor (SSA) • UL Adaptor for accurate low viscosity measurements.

Check out our other testing services too - A variety of thermal & mechanical testing methods are available on request. Also, further savings can be made with volume test discounts: 6 - 10 tests = 10% discount, 11 to 15 tests = 15% discount & 16+ tests = 25% discount!

Finally, don't forget our one-stop material characterisation for flow simulation services - providing a complete profile of material data for Autodesk Moldflow, Moldex 3D & Sigmasoft 3D simulation software packages - Thermoplastic, Thermoset & Elastomer.

For further information about Gammadot's testing & consultancy services, or if you have a specific problem / testing requirement which you would like Gammadot to provide a solution to, please contact us using the details at the top of the page or via the enquiry form HERE.

You have received this newsletter as Gammadot believes it may contain information of use to you, If you DO NOT wish to receive any further quarterly emails from Gammadot, then please reply to this message with the word REMOVE in the subject bar, and we apologise for the inconvenience. Independent Polymer Technology Ltd - Premier testing, consultancy & analysis laboratory providing services covering all aspects of polymer technology Artis Ltd - UK's Leading Rubber Testing Laboratory Celsum Technologies Ltd - Innovative, bespoke rheometry equipment & sensor supplies Infra Scientific Ltd - Manufacturer of novel, low viscosity equipment & UK distributor of Reologica Instruments AB rheometers